LaTeX2WP is a program that converts a LaTeX file into something that is ready to be cut and pasted into WordPress.

This way, you can write, and preview, your post in LaTeX, then run LaTeX2WP, and post into WordPress whatever comes out.

Why would you want to do that? Most users of WordPress wouldn’t.

But if you have ever found yourself typing

` <p align="center"> $ latex \displaystyle \mathop{\mathbb E}_{x\sim X} f(x):= 1 \ \ \ \ (1)&fg=000000$ </p> `

in order to get

and wondered whether there is a better way, maybe this is for you.

WordPress does a good job supporting simple LaTeX expressions. You type $ latex 2^{2^k}$, and out comes . There are, however, some inconveniences if you are typing something more complex:

- The editor windows is small, and it can be slow to save and produce a preview;
- Simulating LaTeX’s displayed equations is a bit painful. If one wants to have numbered equations, they have to be numbered by hand; if one wants to insert one more equation or rearrange the order of presentation, equations must be renumbered by hand, and so do all references to equations;
- If one wants to publish the notes/ expositions posted on WordPress, then one needs to convert them back to LaTeX.

There are also smaller concerns: for example some WordPress themes (including *in theory*‘s one) typeset LaTeX equations in gray. This can be changed by appending `&fg=000000`

to every formula, which is nice to automate. If you are used to having simple macros like \E for expectation, it is annoying to have to type {\mathop{\mathbb E}} each time.

With LaTeX2WP you write your whole post in LaTeX, and use LaTeX to preview it. You cannot use arbitrary macros, but any macro that can be implemented by a simple substitution can be easily added. Any set of theorem-like environments such as *theorem*, *lemma*, *proposition*, *remark*, etc. can be defined, with any combination of counters. Displayed equations are automatically numbered and centered, and all math equations are typeset with black fonts. The LaTeX commands \label, \ref and \eqref are supported, and \ref and \eqref translate to clickable links. You also maintain a LaTeX source for your post, which is ready for publication in another venue.

So far LaTeX2WP has been used at *what’s new* and here, at *in theory*. You’ll notice that the typesetting styles for theorems and section names look different. It is easy to modify the typesetting options to suit your own taste.

I would like to thank Terry Tao with his patience while using a very buggy early version and suggesting several useful improvements.

LaTeX2WP is distributed as free software with a GPL 3 license.

(More or less, this means that you can do with it whatever you like. If you create and distribute a modified version, however, you must distribute it as free software under the same GPL license and credit me for having written the original version.)

If you would like to try it out, click the download tab. If you would like to learn more about the features and limitations of LaTeX2WP, or if you are using it and have a question or a bug report, click the using LaTeX2WP tab.

If you end up using it, do let me know, by commenting on this page or by sending an email to LaTeX2WP at gmail dot com. Do include a link to your blog.

Pingback: Converting LaTeX to WordPress « in theory

Luca,

This sounds great. Thanks for making this available. I maintain a blog for my coding theory course and the limitations of wordpress LaTeX support has been somewhat annoying. I’m looking forward to using your program to make my life much easier. Thanks again.

Excellent! Would you consider licensing this under GPL V2 or GPL V2+? Some people at big companies (e.g. Microsoft) can’t contribute to GPL3 software because of its terms regarding patents.

I will try this out. Looks really like great idea…dick

Cool! I’ll give it a try, definitely.

Meanwhile, I have invented my own little hack to type maths in WP by using an external editor (vim in my case) that is called up by a Firefox plugin called

It’s all Text, and where I have few pre-defined abbreviations to speed up the typing, e.g. $$ to type “$ latex”, i.e. the beginning of LaTeX formula, ZZ for the proper mathbb symbol for etc etc.I think I have found some bug: I typed

\begin{document}

$\Phi:I_1 \to I_2$

$$\Phi \circ T_1=T_2\circ \Phi$$

\end{document}

But I obtained

I would call it the phi-bug 🙂

You are right, it’s because the substitution rule used to render \P as is applied to every occurrence of ‘\P’ even if \P is followed by other alphabetic characters, and so is a different LaTeX command. I’ll fix this in the next revision (which should be coming out by the end of the week)

Grazie mille, e buon lavoro!

c.c.

Thank you!!! This is wonderful!

Pingback: LaTeX2WP Update « in theory

Pingback: 580 -Cardinal arithmetic (7) « Teaching page

Hi,

I just made public the first post I wrote using your program. Thank you very much! You have saved me hours already. (The link in the previous comment is from the blog.)

There were a few (minor) strange anomalies during the conversion:

1. The first two lines disappeared; instead, it only appeared “Luca Trevisan” (and a link).

2. I had a definition by cases that refused to compile. I have used the LaTeX array command in previous posts, so I am not sure what the issue was.

3. The last line from paragraph -7 disappeared.

4. A few things were supposed to appear in blue, but didn’t.

(I am not sure whether I should have posted the bugs here or in the entry for Using LaTeX2WP; sorry.)

Andres: I am happy the program (sort of) works for you.

I wonder what causes the problems you had. If you send me the LaTeX source (at the address latex2wp at gmail dot com) I could try to replicate those anomalies and understand what caused them.

Pingback: 305 -5. Extensions by radicals « Teaching page

Pingback: Hardness of approximation - Lecture 1 « Expanders, Property Testing and the PCP theorem

Pingback: Only A Test « Mr Toms MathPhys Extravaganza

Hi there! Finall I manged to get the time to finish my post using your program and I have to say that it came out very good. The only down side is that I had to change my theme. I used to have a black background theme but since the text in theorem-like environments grayish it’d been harder to read for my two or three usual readers. I tried to understand why this was so but couldn’t solve the problem and just changed the theme.

Anyway thanks a lot for providing us with a tool that makes math easier on WordPress.

http://climbingthemountain.wordpress.com/2009/04/03/real-analysis-limits-and-continuity/

Thanks! Great stuff!

Just to tell you that I managed to bet back to my old theme since I could sort out the html code in order to get tables around my theorem like environments.

Once again thanks a lot for this tool.

I thank you for this program. One issue math inline seems to be typeset below the line more than it should. Is that a wordpress issue or is that something we can fix?

Excellent script suit. I was so annoyed by the wordpress message ‘unable to parse the equation’,until I hit upon this site. This did wonders to me. Thank you so much for sharing the script.

I am looking forward to have tikz/pgf supported as well:-)

Best regards

R

Pingback: Welcome « VeRTEx

Thank you very much for this great program.

¿Is it posible to set latex2wp up so that it works with a utf-8 source file? Since I write primarily in spanish it’s a minor inconvinience to have to add the accents later… Typical example: “demostración” converts to “demostraciÃ³n”.

Thank you once again.

Pingback: LaTeX2WP minor update « in theory

To pablolessa:

You can use the Spanish option of the babel package.

Some texts that I write in Portuguese are done that way and I’m not having any problems with accents so far.

Pingback: About the Blog « Math Questions

Pingback: An interesting inequality due, perhaps, to Kashin « Mathematical Remarks

Pingback: O displaystyle do LaTeX permite uma melhor visualização no WP « problemas | teoremas

Pingback: Latex2wp Example.html « random terrain

As requested above, I am using LaTeX2WP over at lewko.wordpress.com. I’ve been very happy with it.

I’ve been using LaTeX2WP and find it quite useful when contributing to the Delta Epsilons group blog (deltaepsilons.wordpress.com).

Thanks for making it available!

Dear Luca, thanks for your work.

But actually I know nothing about python. When I write pyhton latex2wp.py example.tex in the command line, I read this message:

File ‘”, line 1

python pyhton latex2wp.py example.tex

^

SyntaxError: invalid syntax

Help me, please…

Hi Octavian!

Have you made any change in the files provided by Luca? I think that’s why you’re getting a syntax error.

http://climbingthemountain.wordpress.com/about/

First of all: Great tool! I am currently trying it and have two observations:

1) \noindent is noz recognized

2) \newcommand does not parse

Any idea? Especially on the second? Thx in advance.

I’ll add \noindent in the next release, but \newcommand is not coming any time soon.

Pingback: Lect 3: Stable Marriage Problem « Introduction to Algorithm Analysis and Design

A couple more observations of no real practical concern, but probably nice to know:

1) \nonumber is not supported

2) paragraphs before and after \begin{description} seem to get deleted occasionally.

3) \usepackage[all]{xy} is not supported (that seems to be WordPress)

The output in my blog currently looks ‘Taoesque’. How can one steer that more towards ‘in theory’ style? Is this because of the &fg=000000? A small hint would suffice. Thx.

Awesome !!!!

Thank you very much, for let available the LaTeX2WP program.

Luca, the program is great. Thank you for it.

My question: Since I am publishing in German, I would like to habe “Satz” instaed of “Proposition” e.q. I tried to chace it in macrosblog.tex

\newtheorem{proposition}[theorem]{Satz}

no result. Then I worked through latexwpstaly.py, but I don’t know how th chance it there. Al what I have done produced error messages.

Is this coded soemwehre else? Can you please help me?

Thanks

Ulrich

.. forget the question. I got it reading more carefully the README file.

Ulrich

Does it know how to render source code?

Dear Luca,

This is an excellent tool! I have a feature request. Is it straight-forward to have fixed-width columns in a tabular environment? I mean the p{width} or m{width} type columns in standard latex tabular environment. I am typesetting a table for my blog for which I need it.

best

Shalin

I have ended up typesetting two pages with this script.My home page at http://shalin.wordpress.com and a post http://wp.me/p8BPt-4d. The M variable in latex2wpstyle.py seems like the key to extension. I want to add support for font-sizes and typesetting of code. I tried adding following substitution strings:

[“\\begin{verbatim}”,”

“],

[“\\begin{large}”,””],

[“\\end{large}”,””]

But nothing happens. It seems every environment that is not listed in theorem-type environments in latex2wpstyle.py is ignored. Is that true? Is there a straightforward way of adding support for the above.

Once again, thanks.

Shalin

Oh, the interesting bits were interpreted out. Following is what I tried. per=pre, sapn=span.

[“\\begin{verbatim}”,””],

[“\\end{verbatim}”,””],

[“\\begin{large}”,””],

[“\\end{large}”,””]

Alright, the angular brackets are a culprit. Removed them.

[“\\begin{verbatim}”,”pre”],

[“\\end{verbatim}”,”/pre”],

[“\\begin{large}”,”span style=\”font-size:x-large;\””],

[“\\end{large}”,”/span”]

Pingback: Feedback Statistics « Introduction to Algorithm Analysis and Design

Pingback: Project Proposal « Dynamic Programming and Stochastic Control

Pingback: Long LaTeX posts in WordPress.com « Math840's Blog

Hi-

This converter is excellent thanks! I should begin posting articles regularly at:

http://bfrank.org/overeducated/

So far, I am doing footnotes and references manually, (I am not a clever enough programmer to code such things), so I hope this support will be provided at some point.

Thanks!

-Steve

Pingback: LaTeX nach WordPress – Der Schockwellenreiter

Pingback: Latex2WP « Ceterum Censeo

Pingback: Displaying mathematics on the Web « What’s new

Pingback: LaTeX to WordPress. Something for my col… « Paul M. Watson

It would be great to also make automated conversion from LaTeX to some wiki formats (e.g. MediaWiki and wikidot.org). I think we are to add it in a future version of “LaTeX to WordPress”.

Pingback: LaTeX in WordPress « A test

Pingback: Displaying maths online, II « What’s new

I didn’t end up using your script as is, because I’d already written one by the time I found this. I did borrow from it though and now use the p align center stuff that you did for my wordpress blog (http://peeterjoot.wordpress.com/)

My script, a version of which is here in case anybody else wants to use it is here:

http://sites.google.com/site/peeterjoot/math2009/tex2blog

(includes an option also for experimental conversion of latex to mathml output for blogger where javascript is allowed).

A couple differences from your script:

– I can’t grok the python used enough to modify yours to do more complex macro replacements, and cobbled together some using perl that mostly work.

– I require the latex be compiled since I use the .aux and .bbl files to generate equation numbers and bib contents.

Pingback: LaTex Example « Euler's maze

Braces should be removed from the text, as in this example:

\documentclass{letter}

\begin{document}

{Braced}

\end{document}

In HTML generated by L2WP “Braced” is erroneously shown braced.

Please add at the beginning of your script:

#!/usr/bin/python

Pingback: LaTeX2WP, Princeton grad student seminar, and characteristic polynomial coefficients « A Day in the Life of a Wild Positron

To porton: There are tools such as latex2wiki and latex2qwiki. Google will reveal them immediately.

Pingback: Feedback 3 statistics « Introduction to Algorithm Analysis and Design

Pingback: QuickLinks vom 17. November bis zum 24. November — instant-thinking.de

Pingback: using latex for wordpress « Musings of a curious mind

Ignore please, testing.

is true because

How will this work?

Ignore please again; one more thing to test:

Define iff

That is it.

Please ignore, one more test:

Define iff

That is it.

Still testing

OK?

Ok, THANK YOU. I hope it’ll work.

Hi-

Thanks by this excellent converter! I am using it at:

http://wdb.ugr.es/~edp/blogs/nonlinear_analysis/

Thanks!

dGoliat

Hi Luca,

Thanks for this converter. Currently, the lines enclosed in \ifblog…\fi are also processed and have their double returns converted to and their multiple spaces/single returns to a single space. If this structure is used to put source code in WordPress, this changes the formatting, which is undesirable. Is there a way to suppress this processing so that a verbatim sort of environment is provided by \ifblog…\fi—I see where this is done in latex2wp.py but when I suppress the corresponding lines, display style equations don’t get the WordPress latex affix and suffix appended to them— or better yet, to provide support for listings environment?

Pingback: A great tool « Rolfe's Lecture Notes

Pingback: LaTeX in WordPress « Eikonal Blog

Pingback: Lecture material 1: Introduction, linear codes « Introduction to coding theory (CMU, Spr 2010)

Hi Luca!

I’m already using your script at my wordpress.com blog but I tried using it at blogger too (using also a javascript that allows for LateX code to be rendered) but I had some problems with it. For some reason hyper references don’t work…

Do you mind if I send you via email my changed code to see if you can help out a bit with the hyper references bug?

Pingback: Using LaTeX in WordPress « God, Your Book Is Great !!

Sounds interesting, gonna try this out!

Pingback: LaTeX Blogging with Emacs « Curious Reasoning

Pingback: More on Blogging in Latex « Curious Reasoning

Pingback: Thw show is back on the road « Climbing the Mountain

Pingback: A new address « Climbing the Mountain

Pingback: Return to LaTeX | neverendingbooks

Pingback: Posting items to my blog using wplatex « Division by Zero

Great utillity

The following do not work

a)\subsubsection

b)eqnarray

Pingback: Really having problems with Latex « Worked Problems in Physics

Pingback: LaTeX wordpress problems solved « Worked Problems in Physics

Hello there. First of all I wanted to let you know I am using Latex to WP for my blog. I only have very few entries so far but I have noticed that latex code is always very blurry. I am sure this is not a problem of latex2WP but I do not really know where to ask to solve the problem. Look here for example

http://yannisparissis.wordpress.com/2010/02/05/the-discrepancy-function-in-two-dimensions/

Any help would be most appreciated!

I’ve just see your blog and it doesn’t seem to be blurry at all. Does your equations look blurry in all computers you use? Have you tried changing themes just to see how it looks like?

Thanks for the answer. I just realized that the problem was my browser’s settings. For some reason the size was reduced from the default (-1 from the default) and that made the latex part of the blog look blurry. Same effect if you increase the size (cmd/cntrl+ or cmd/cntrl -). So that way i discovered that latex code looks nice only with the default size for web pages.

Pingback: Gettin’ Started « I study

Pingback: I learn

Thanks! Enjoyed using your application.

Pingback: Mathematical Approaches to School Districting » April 10, 2010: how time flies…

Pingback: For those using LaTeX | The Cryptography Reading Group

Pingback: Convert/Use Latex for HTML « 01law's Blog

Pingback: Итоги дистанционной авантюры | Hsecoopgames's Blog

Much appreciated.

Pingback: TeX and LaTeX links « Eikonal Blog

Pingback: LaTeX e Wordpress: LaTeX2WP | Incerteza em Princípio…

Pingback: TeX杂文——转自ChinaTeX新浪博客 | Sun Ju's Blog

Pingback: Wordpress help « Introduction to Algorithm Analysis and Design

I installed the 64-bit version of Python 3.1 on my 64-bit Windows 7 computer and followed the compile instructions. Running the command

python latex2pw.py example.tex

inside a terminal window in the directory containing the file example.tex does not create a file named example.html. Instead it produces an error message as follows:

Traceback (most recent call last):

File “latex2wp.py”, line 657, in

s=extractbody(s)

File “latex2wp.py”, line 140, in extractbody

for i in range(1,(len(L)+1)/2) :

TypeError: ‘float’ object cannot be interpreted as an integer

Pingback: Project Update Sept 2010(and other small things). « Acyrl's Blog

Pingback: First post « Indiscernable

Pingback: Blog for Graduate Computational Complexity 2010 | Computational Complexity, Fall 2010

{F = F_+ – (F_+-F_)}

Pingback: Link problems : Markdown versus latex2wp.py | neverendingbooks

Pingback: About « mathTHÍCHinTOÁNmyHỌCbrain

Great program – thanks very much. I’m now using it to produce pages for my physics/math tutorial blog at http://physicspages.com/.

One little snag I found with it though. When converting an eqnarray*, each line of the array is rendered using inline format so that fractions are squashed to fit into a single line. Even though the array as a whole has a \displaystyle tag, it seems not to affect the array elements. I’ve fixed this by converting an eqnarray* to a “eqtabular” object of my own invention, and then converting each element within that table into a separate Latex element with its own \displaystyle tag.

As I’ve never written anything in Python before, I’m not sure how robust my fix is though.

Pingback: Hello world! | conlatio

Pingback: Guidelines for adding new posts « ISM and Star Formation

Pingback: Recurrence and genericity – a translation from French « Area 777

Pingback: The Simplex Algorithm | Jingjin Yu

Thank U！

I‘ii try it：）

Pingback: Reviewing the regularity theory of elliptics PDEs via the Laplace equation. Part I. «

Pingback: Karhunen-Loève expansions: A primer « Electric Death Metal

Pingback: A (Hopefully) Concise Introduction to the Simplex Algorithm | Jingjin Yu

I had to add in line 255:

while T[p-1] != “\\end{tabular}” and T[p-1] != “\\end{btabular}”:

if format[i]==”|” :

i=i+1

continue

(cut horizontal lines)

Use…

http://www.codecogs.com/latex/eqneditor.php

Thanks!

Pingback: Latex2wordpress « under the sun

I tried it. It is amazing! Thanks! see

http://randomku.wordpress.com/

Pingback: Lovasz theta number « a short fat boy and his chalkboard

As instructed, thanks!

$latex $$\left( {{b_j}} \right)_{j = 0}^\infty $$ $

I’m sorry, please ignore what I posted.

This is just a test.

Pingback: Diversions: project Euler | The Approximist

Pingback: Latex to Blogger powered by MathJax (Experimental) | Vision and around

Pingback: testing out some LaTex « "pewter walruses fight under sparkling orange trees yelling obscure mantras"

Pingback: The Riesz Representation Theorem – I « Nirakar Neo's Blog

Pingback: You might be wondering: Mathematical blogging « Yang-Baxter Equations & Integrable Systems – 2011

Pingback: Welcome: 2011 Edition! « VeRTEx

I’m late to the party but I’m using it now! http://ergodicity.net/

Pingback: The strong converse for the MAC, part 3 « An Ergodic Walk

Pingback: A few more thoughts and advices about LateX « The Quantum Gang

I just found out about the “latex” a month ago. Then finally I tried to write using the latex and the results are excellent. but had to be careful if you do not want to error.

Does Latex2wp support Latex essays which involve Chinese?

Pingback: Power tool for mathematical blogging « Brenton LeMesurier

Pingback: LaTeX to WordPress (latex2wp.py) « Guzman's Weblog

Pingback: LaTeX to WordPress (latex2wp.py using terrystyle.py) « Guzman's Weblog

Hey, do you know if it is possible to use Cyrillic letters like Ж or Д in LaTeX formulae? I expect you’d need to load a new packet or something but I’m not sure how.

Could anyone shed some light on the situation?

Pingback: On Writing Posts | musingsbymats

Is it possible use macros with arguments in this script?

Thanks.

I made a simple change and now it is possible to use the enviroment align*,

Just change this piece of code in latex2wp.py

“””

changes $$ … $$ into \[ … \] and reformats

eqnarray* environments as regular array environments

“””

doubledollar = re.compile(“\\$\\$”)

L=doubledollar.split(m)

m=L[0]

for i in range(1,(len(L)+1)/2) :

m = m+ “\\[” + L[2*i-1] + “\\]” + L[2*i]

m=m.replace(“\\begin{eqnarray*}”,”\\[ \\begin{array}{rcl} “)

m=m.replace(“\\end{eqnarray*}”,”\\end{array} \\]”)

return m

for

“””

changes $$ … $$ into \[ … \] and reformats

eqnarray* environments as regular array environments

“””

doubledollar = re.compile(“\\$\\$”)

L=doubledollar.split(m)

m=L[0]

for i in range(1,(len(L)+1)/2) :

m = m+ “\\[” + L[2*i-1] + “\\]” + L[2*i]

m=m.replace(“\\begin{eqnarray*}”,”\\[ \\begin{array}{rcl} “)

m=m.replace(“\\end{eqnarray*}”,”\\end{array} \\]”)

m=m.replace(“\\begin{align*}”,”\\[ \\begin{array}{rl} “)

m=m.replace(“\\end{align*}”,”\\end{array} \\]”)

return m

I think that with patience it’s possible add many others enviroments.

Regards.

You rocks sir.. Very helpful information.. thanks

Maikol: I didn’t implement macros with argument. it’s at the top of the list of desired features for a future release.

Thank you very much Luca, I’ll be expect the new release.

Regards.

This is great. Thanks Luca. Just what I needed. Best, Tom.

[…]below you will locate the link to some web pages that we believe you ought to visit[…]

[…]please go to the internet sites we follow, like this a single, as it represents our picks from the web[…]

This is a great tool. I get very good results using it. Way better than the direct way, and the color of the equation text is different and stands out. Thank you.

Pingback: Pochhammer Symbol, Brought to You by latex2wp « its like melting

Pingback: By the power of python, from Latex to wordpress | Room 196, Hilbert's Hotel

Pingback: Convert your LaTeX file to WordPress smoothly with LaTeX2WP « okaydavid

Pingback: Hello… | My Math Blog

Just to come to say thank you.

Works like a charm! Thanks!

I’m using it on my (non-public) research lab-journal wordpress site.

I had to change the $\latex to $$ since that what my latex plug-in uses but other than that I’ll use it as is.

Thanks again.

Ran

Pingback: Complex Analysis « Andy Soffer

Pingback: Visto nel Web – 34 « Ok, panico

Pingback: De Latex a WordPress « Memorandum Matemático

Using your program at studeocs. It’s very nice so far! I need to include citation information in my blog (for example, have a bibliography at the end of the post and numbered in-document links within the text). Any idea how I could automate that? I’ll be using a bib file for all my references. Thanks.

HI, I just started blogging and posted my very first blog with your latex to wordpress script. It is very nice, Thanks!

The only thing I noticed is that it seems the following escape sequences are not converted correctly:

1. “\{” or “\}” is rendered “{” or “}” in latex but “\{” or “\}” in latex2wp

2. “\verb|…|” is rendered “…” in latex but “\verb|…|” in latex2wp

3. “\^{}” is rendered “^” is latex but “\^{}” in latex2wp

Please let me know if there is a way to print those special symbols consistently in both latex and latex2wp 🙂

Thanks

To render curly brackets, put them in a math environment: $\{$ will render as {. Same for ^. Unfortunately there isn’t a simple workaround for the verbatim mode of latex

Thanks!

Pingback: LaTex display « Free Mind

Pingback: (LaTeX) implementation : random measures

Pingback: AC, part III: Choice in context | whateversuitsyourboat

Pingback: Hello « Anurag's Math Blog

Hi Luca!

I think that if you use some service like github.com to share the code, the community maybe could improve it. This script is very useful and I’ll be glad to help at least a little.

Regards.

I think this is among the most important info for me.

And i’m glad reading your article. But wanna remark on few general things, The site style is great, the articles is really great : D. Good job, cheers

Luca,

I bow down before a superior being – thank you so much for making this! Using it for my Machine Learning (and etc.) blog

http://neonwatty.wordpress.com/

best,

Jeremy

Pingback: Latex2WP: the easy way to use latex on a wordpress.com blog « Neon-Watty

Pingback: LaTeX to WordPress « theundefinedlimit

Pingback: AC, part III: Choice in context | whateversuitsyourboat

$ latex \displaystyle \mathop{\mathbb E}_{x\sim X} f(x):= 1 \ \ \ \ (1)&fg=000000$

Hey – I wanted to thank you for this. I’ve just started using it as well.

I maintain a mathblog at mixedmath.wordpress.com.

$ latex \displaystyle \mathop{\mathbb E}_{x\sim X} f(x):= 1 \ \ \ \ (1)&fg=000000$

Pingback: Expected switching for the Dirichlet distribution | Drunks&Lampposts

Supply basic details of a phone number like name of the owner, address and the number itself to get a search will

underway. This process only allows for two removals, so if you have multiple entries in their

database, you may have to use other email addresses to remove all instances

of your information from their website. How can I do reverse cell phone lookup to find

who owns it.

Hi,

used it for my first post- works quite fine, but did have to do some editing.

Hello Luca,

I would like to thank you for your latex2wp program. It has helped me a lot! I have also included a link to yours in my own blog.

http://notesoneng.wordpress.com/

Thanks again.

Pingback: Alternate derivation of linear response function | Joshua Goings

Pingback: Derivation of Time Dependent Hartree-Fock (TDHF) Equations | Joshua Goings

Try this

Pingback: The central amenability constant of a finite group: Part 2 of n | Since it is not ...

Nice post. I used to be checking continuously this blog

and I am inspired! Extremely useful information particularly the final phase :

) I take care of such information much. I used to be looking for this certain

info for a very long time. Thanks and best of luck.

Hi there, everything is going fine here and ofcourse every one

is sharing information, that’s genuinely excellent, keep up writing.

Pingback: A (Hopefully) Concise Introduction to the Simplex Algorithm | Jingjin's Notebook

My client George is a good start. Technology and Jealousy in easy weight loss tips Why

do we get jealous that our partner is always on their phone

or constantly checking their social network account.

In conjunction with a qualified medical professional, the symptoms of this addiction?

So, what can we do in easy weight loss tips to stop communication break down

and our relationship. A counselor may provide you with healthy coping mechanisms to relieve jealous feelings.

This diet promises that after a few days of following Sean Murray Weekly Diet Plan.

The dried green stems of three species in Asia equisetina ephedra, Academia Sinica, ephedra, you will have plenty of hours in

your life. Some of the ingredients in Banital may

support weekly diet plan. Huge numbers of people are afflicted by an underactive thyroid.

Pingback: $latex LaTeX$ | Brain Design

Awesome blog! Is your theme custom made or did you download it from somewhere?

A design like yours with a few simple tweeks would really make my

blog shine. Please let me know where you got your design.

Cheers

Pingback: LaTeX2WPSC – LaTeX у wordpress.com конвертор | м4т3м4т1к4

We had to construct you just one very small comment too finally thanks quite definitely over again for your attractive facts you’ve reviewed on this web site. It is often really open-handed with persons just like you to allow quickly juat just what a few individuals probably have marketed being an automated e-book to assist along with generating a number of dough for his or her very own conclusion, just remember given that you have attempted it in the event you wanted. These tips likewise acted similar to a great way to fully grasp lots of people have identical attention similar to my personal unique to find out an increasing number of in respect in this make a difference. I believe there are several more pleasurable predicaments in the beginning for many who commence studying your own log submit.

Pingback: LaTeX and WordPress.com | Thiago G. Martins

Pingback: Test for LaTeX2WP | Elliot's Blog

In February 2004 he embarked on UN-sponsored talks with the Turkish Cypriot administration of North paphos car hire.

Pingback: Prelim Practice Questions- SVAR Application: | Regress Forward

Pingback: Short Latex Helper | mathtuto

Pingback: From Proofs to Prime Numbers: Math Blogs on WordPress.com — Blog — WordPress.com

Pingback: From Proofs to Prime Numbers: Math Blogs on WordPress.com | CÔNG TY IN ẤN QUANG MINH

Pingback: From Proofs to Prime Numbers: Math Blogs on WordPress.com | Electrician Richardson

Pingback: math | electericity

Pingback: An intuitive introduction to calculus «mixedmath mixedmath

Pingback: 5 Short Proofs of Simplified Stirling’s Approximation | Dirty Mathematics

Pingback: An intuitive introduction to calculus » mixedmath

Pingback: Math Blog Snippet | the Cyclic Grizzly

Awesome! I was about to write an app like this. Looks like I can focus on math instead 😛

Pingback: Writing posts with Lyx / LaTeX | Physics pages

Pingback: Fundamental domains | Not really blogging

Thanks for this program! I started using it at amakelov.wordpress.com.

Pingback: Luonnolliset luvut ja Peanon aksioomat | Välttämättömiä johtopäätöksiä

Thank you for the very helpful program! I just wrote my first post with it at http://johtopaatoksia.wordpress.com/ (in Finnish).

Pingback: Friendly Introduction to Sieves with a Look Towards Progress on the Twin Primes Conjecture » mixedmath

Pingback: More on Latex in WordPress. | didgaha

Pingback: Moving over « The Quantum Gang

Pingback: Moving over | Climbing the Mountain

Pingback: Wrapping my head around the conjugacy of the shift map on the quadratic map | Paul Tan's Blog

Pingback: Using double dollar signs for display latex expressions issue in wordpress.com | Just econ it

You’ll for certain do not have something to lose with Adiphene, thus for those

that actually need to slim while not losing their time and power,

then Adiphene is that the product for you. This means

thay everybody who makes use of Adiphene should shed pounds.

Adiphene Weight Loss Supplements Offers a Unique 25% Discount n select package fr Online B Worldwide If the online critiques are something to go by, Adiphene is an efficient

weight-loss option.

Pingback: coppelia | Expected switching for the Dirichlet distribution

Hi Luca, thank you for your wonderful LaTeX-to-WordPress program. Just wanted to let you know that I have been using it for my recent posts and have shared this page so that others can also find out about the program.

Pingback: Personal website, and sharing (esp. learning) resources | Math is hard

Thank you very much!

I wanted to construct a table and it worked great. It would be perfect if we could construct vertical lines separating the table using tabular (e.g. something like \begin{tabular}{c||cc|cc}) but it seems that the program could not parse it.

Pingback: Latex to WordPress | Αποδείξεις από το βιβλίο

Pingback: Share information: Luca Trevisan’s LaTeX to WordPress converter | Statistics Hacks

Hi Luca,

Thanks for the program. I played around with your code and I have implemented the align environment (not the align* one). I can send you the modified code. Since I am not really familiar with Python, I just did somethings with trial and error. I would be happy if you can check the changed code and write it in a better way and update the version, since mine looks like a mess!

If you are interested let me know.

Thanks!

I do consider all of the ideas you have introduced on your post.

They’re really convincing and can certainly work. Nonetheless, the posts are too quick for novices.

May just you please prolong them a little from subsequent time?

Thanks for the post.

Pingback: De Latex a WordPress | Notas breves de Matemáticas

Re only simple macros being covered: http://www.ctan.org/pkg/de-macro (the de-macro package/python script) can be used to first expand some more complicated macros, including (not too tricky?) *nested* ones. See http://tex.stackexchange.com/questions/152651/flatten-macros-prior-to-sharing-latex-file for more discussion.

(I believe the script doesn’t work with Python 3, but it’s OK with Python 2.)

Pingback: Holographic Algorithms Part 1: Matchgrids and the Holant « for formal reasons

Pingback: LaTeX hacks to save your life (and your co-authors’) | The Molecular Ecologist

Pingback: The importance of sketching. The best way to learn is to write. | thoughtsonthecommontoad

Pingback: Streamline your latex into wp | rtraba

są pochopne wyrazić sumę stwórz matrymonialnych, jednocześnie spośród zacisznymi,

jeśli obejmują że znaczenie się na nie sprowadzi im

nazwaną pociecha. Istnieją poważnie chłodne i jeśli rzeczywiście to potrafię ucapić – sztywne.

W 4 faktach na 5 zdecydowanie zaciekawione zostawieniem rozporządzeń do

skupionego majątku.

Pingback: Using LaTeX on WordPress | Proper Physics

Pingback: The Sign of the Quadratic Gauss Sum and Quadratic Reciprocity | Matt Baker's Math Blog

Thank you for writing this program and for the helpful instructions on using it. I have been blogging for a while but just created my first post using your converter:

https://mattbakerblog.wordpress.com/2015/04/30/the-sign-of-the-quadratic-gauss-sum-and-quadratic-reciprocity/

Pingback: Sidenote – Writing equations on WordPress.com | josephkirwin.com

Pingback: Quantum Lovasz Local Lemma | Pieces

Pingback: Use LaTeX in WordPress blog | jadelightking

Pingback: Fórmulas do Latex no WordPress | Renato Melo

I just googled out your program, I intend to be use it in my blog (just starting): http://psanchezterraf.wordpress.com

Thank you very much!

Hi. I searched for latex in wordpress and found your program. This is really great work. I have some knowledge in python too. If I have time, I may improve it. Specially, the area of using definition theoremstyle or other commands like eqnarray in latex. Anyway, than you very much for your time in this. Let me know when you try to improve it. I will help if I can. And the codes were nice and readable by the way.

Pingback: Ease the Pain of Latex Writing in WordPress | Karushi's Blog

Though I said this in mail, I think I should say it here too. This program is compatible with python version 2 only. Not with version 3(probably latter versions). Anyone who is getting errors like “float to integer version” or “s=extractbody(s)”, be sure to reinstall python 2 and it should be gone. Thanks.

BTW, you asked to include blog address too. This is mine: https://karushib.wordpress.com/2015/08/19/ease-the-pain-of-latex-writing-in-wordpress/

$\latex B \cup A$

Hey Luca, thanks very much for sharing the code! I’m using a slightly modified version to run a jekyll-based website here: https://amakelov.github.io

Pingback: LaTeX2WP Test Post | TCS Notebook

Pingback: The Riesz Representation Theorem – I – Nirakar Neo's Blog

Pingback: Hello Word – pixorblog, c++, computations, linux

Pingback: WordpressでのLaTeX (メモ) – Konno Log

I have created a JavaScript based LaTeX to WordPress “converter” at: http://mathtuition88.blogspot.sg/2015/12/latex-to-wordpress-converter.html.

Definitely not as powerful and comprehensive as yours, but may be useful to users seeking a quick and basic solution without having to install python or download anything.

Hi and thanks for this very helpful tool! One question: Is there an easy way to change the numbering of theorems to something like “2.3.1” for Theorem 1 in Section 2, Subsection 3, instead of plain “1”? Putting _SecNumb_._SubSecNumb_ in front of _ThmNumb_ seems not to work …

Pingback: buy boldenone online

Is there a list somewhere of the LaTeX packages which are supported? I like to use some packages, like enumitem or tcolorbox, which maybe are not commonly supported and thus I am unsure whether I should rewrite my LaTeX documents to not use those packages or not.

Cool tool, thanks for making this.

I had a quick question though, you mentioned that:

Do you know a good tool for this direction? Especially for batch jobs? For example, a whole wordpress blog from back-up files. I’ve seen a few that convert straight to pdf, but it’s nice to have LaTeX in between to do some clean up. Also, prefer not to go through html scraping and html-to-TeX since it’d lose info from within the wordpress latex environments (since they just become images).

Pingback: An introduction to the Independent Set Reconfiguration problem and its variants | Đức's Personal Blog

Pingback: Starting the Series B blog – Series B'log

Pingback: Testing – Fantastic Problems and Where to Find Them

Pingback: What are some useful, but little-known, features of the tools used in professional mathematics? | What's new

Hi can I indent paragraphs? I tried to set up indent, for example, \setlength{\parindent}{0.4in}. But in HTML it did not come out.